SurfaPaint ThermoDry Elastomeric Roof Paint

SurfaPaint ThermoDry Roofs can be applied directly on exterior horizontal (e.g. terraces) and inclining surfaces. New substrates from cement or masonry should have cured for more than 3-4 weeks before primer application. Adverse conditions during or immediately after application may affect the coating’s properties. Preparation: Ensure all surfaces are clean and dry prior to application. Remove any dust, dirt and flaking parts. Stir well before application. Fill the bridging gaps and hairline cracks with a suitable putty. Surfaces are primed with SurfaPaint ThermoDry Roofs thinned with water up to 50%. Application temperature should be between 5 - 35 oC. Apply 2 coats using a good quality brush, roller or by airless spraying without thinning. Ensure corners and edges are adequately covered. Additional coats should be applied 24-36 hours after the previous application. Spreading Rate: 2 ± 1 m2/L. Available Packaging: 10L pails.